Material and infos for Pocobo 2, the mobile PM-Sensor of the aspern.mobil LAB.
gerfried
b4794e6aa3
added screws and other parts
|
10 månader sedan | |
|---|---|---|
| Pocobo_2.ino | 10 månader sedan | |
| README.md | 10 månader sedan | |
| enclosure.zip | 10 månader sedan |
README.md
*
aspern.mobil LAB Pocobo 2 (Pollution Collection Bottle) *
The Pocobo 2 collects data on particulate matter, temperature and humidity while travelling and sends this information with the GPS-position to the aspern.mobil LAB DATAhub (https://datahub.mobillab.wien).
https://www.mobillab.wien/en/pocobo-2/
v1.0 (13.06.2025)
COMPONENTS
- Arduino MKR NB 1500 (https://www.arduino.cc/en/Guide/MKRNB1500)
- Sensirion SEN54 PM Sensor (https://www.sensirion.com/products/catalog/SEN54)
- Adafruit Mini GPS PA1010D Module (https://learn.adafruit.com/adafruit-mini-gps-pa1010d-module)
- Dipole Pentaband Waterproof antenna (https://store.arduino.cc/en-at/products/dipole-pentaband-waterproof-antenna?queryID=undefined
- 3.7V, 2000mAh Battery (https://eckstein-shop.de/LiPo-Akku-Lithium-Ion-Polymer-Batterie-37V-2000mAh-mit-JST-PHR-2-Stecker-LP803860)
- Adafruit Powerboost 500 Charger (https://www.adafruit.com/product/1944)
- Adafruit RGB On/Off Switch (https://www.adafruit.com/product/3426)
- Fillamentum PLA Extrafill Skyblue
- Fillamentum PLA Extrafill Trafficwhite
- screws lid (M4x16 lenticular head)
- screws inner part (M3x10 lenticular head)
- screws electronic components (M2x6 lenticular head)
- thread insert enclosure (M4x8,1)
- thread insert inner part (M3x3)
- wires
IMPORTANT INFO:
- Each Pocobo 2 needs to have a unique identifier token to be able to send data to the DATAhub. Please contact gerfried.mikusch@mobillab.wien to get a token.
CONTACT:
aspern.mobil LAB
Sonnenallee 35
1220 Vienna
Austria
Gerfried Mikusch
gerfried.mikusch@mobillab.wien